Standard HVAC equipment is rated under optimal conditions. That means the specification you bought is not the performance you get when outdoor temperatures drop and your site cannot afford to stop.
For remote sites, temporary industrial installations, and facilities where heating and cooling interruptions carry real operational consequences, that gap between rated and actual performance is not acceptable. AirTreater systems are built to close it permanently.
Full Rated Output Even at Very Low Temperatures
Conventional heat pumps derate in extreme cold. Their nominal capacity figures are measured under laboratory conditions, not at the temperatures your site actually experiences in winter.
Every AirTreater system delivers at least its nominal heating and cooling capacity at all outdoor temperatures. This is not a design target. It is a guarantee.
- AirTreater Čáhci maintains 120 kW nominal output at -15 °C using compressors alone, with no integrated backup system required to reach that figure
- AirTreater Biegga guarantees at least 81 kW of heating or cooling capacity at all outdoor temperatures, regardless of conditions
- Integrated backup systems activate in extreme sub-zero conditions to sustain output, not to compensate for a performance shortfall
When the temperature drops, your system does not. That is the engineering baseline AirTreater was built on.
Built for Sites Where Standard Systems Fail
Remote sites, construction projects, temporary industrial operations, and critical process facilities share a common problem: standard HVAC infrastructure was not designed for them.
Fixed installations require civil works, lead times, and permanent infrastructure commitments that many sites cannot accommodate. AirTreater containerised solutions eliminate those dependencies entirely.
- The container connects on site in a single working day
- Without heat distribution requirements, the system reaches full operational status within 4 hours of arriving on site
- No permanent plant room space, no specialist civil works, no infrastructure commitment that outlasts the project
- When the project moves, the system moves with it
For sites where heating and cooling are a project requirement rather than a permanent asset, that combination of speed and relocatability changes the procurement calculus entirely.
Scalable Power from 84 kW to 420 kW
Site requirements vary. A single product specification rarely fits every application, which is why AirTreater’s product family covers a wide range of industrial and commercial scenarios.
AirTreater Biegga is an air-to-air heat pump containerised solution delivering up to 165 kW maximum heating capacity, with 84 kW heat pump output and 81 kW electric battery backup support. It covers spaces from 500 to 1,500 m² and operates as a complete heating, cooling, and dehumidification system in a single unit.
AirTreater Čáhci is an air-to-water heat pump containerised solution for large sites requiring liquid-cycle energy distribution. Maximum heating capacity reaches 420 kW, with the heat pump operating down to -28 °C. Below -28 °C, the integrated backup system guarantees at least 300 kW even without external electric power in hazardous situations. Čáhci can also be configured with a ground source heat pump where a borehole field is available.
- Biegga: up to 165 kW heating, 81 kW cooling, suitable for large halls and industrial spaces
- Čáhci: up to 420 kW heating, scalable for high-demand industrial and commercial sites
- Prosea: custom-engineered process cooling and heating, specified to each individual application
For process industry applications where standard configurations are insufficient, AirTreater Prosea systems are designed from the ground up to match the thermal requirements of the specific site.
Remote Monitoring and 24/7 Support Included
A system performing at full capacity on a remote or unmanned site is only valuable if you can verify it and respond when something changes. AirTreater addresses this directly.
All AirTreater systems integrate with an automated remote management platform, providing real-time operational data and full settings control through a standard web browser. Named end users can also have access to the automation system. No specialist software, no on-site visit required to adjust setpoints or review system status.
- Real-time visibility into system operation from any location with a browser connection
- Settings adjustable remotely via GSM or bus connection, without dispatching a technician
- Alarms routed directly to AirTreater’s service centre for immediate response
- 24/7/365 help desk support, available every day of the year without exception
- Full integration with existing building automation systems where required
For operations that run continuously, support availability outside business hours is not a premium feature. It is a baseline requirement. AirTreater’s service centre operates on that basis.
Get Your Site Conditions Under Control
If your site operates in extreme temperatures, requires rapid deployment, or cannot tolerate the performance gap that conventional equipment delivers in cold weather, the specification conversation starts here.
AirTreater’s technical team works with site-specific parameters to identify the right system configuration, confirm capacity requirements, and establish a deployment timeline that fits your project schedule.
- Confirm which system configuration matches your site’s heating and cooling load
- Review deployment logistics and connection requirements for your specific location
- Establish what guaranteed nominal capacity means for your operational continuity
Contact the AirTreater team to discuss your site requirements and request technical documentation for your procurement review.
