Efficient heating, cooling, and dehumidification – in all conditions
AirTreater products are designed to work reliably in the most demanding environments and conditions – energy efficient, environmentally friendly and smart. They offer a state-of-the-art environmental management solution with a unique hybrid implementation that ensures stable heating performance in all outdoor temperatures. The design is based on the principle of always guaranteeing the promised performance, regardless of the environment.
AirTreater / Biegga
Biegga is a portable air-to-air heat pump solution that provides at least 81 kW of power for heating, cooling, dehumidification and air filtration in all outdoor temperatures with 100% reliability.
It is specifically designed for large premises, halls and industrial sites where reliable equipment is required in a cost-effective way – whether for a building project or a longer-term need (range 500-1500 m2, always calculated on a site-by-site basis).
Biegga in summer – cooling and cleaner indoor air.
- Effectively cools large spaces
- Filters air and removes moisture
- Total CO2 emissions: 0 kg.
Biegga in winter - efficient heat even in cold conditions
- 100% guaranteed 81 kW heating power in all outdoor temperatures
- Maximum power up to 160 kW
- Significant savings compared to traditional heating systems.
- Total CO2 emissions: 0 kg
What to consider when choosing a heating solution? Will the promise of the rated output be met in all circumstances? How do AirTreater products adapt to different environmental management requirements?? Read the answers to frequently asked questions →
AirTreater / Čáhci
Čáhci is a versatile, portable air-to-water heat pump solution providing up to 190 kW of heating capacity and 90 kW of cooling capacity in all outdoor temperatures. It is ideal for large sites where an energy-efficient, efficient and stable cooling or heating solution in liquid circulation is required.
Performance is guaranteed by 3 state-of-the-art 30 kW air-to-water heat pumps and a 100 kW environmentally friendly HVO condensing oil boiler. As HVO oil heating is virtually emission-free and the electrical power required by the boiler is very low, can provide 100 kW of heating independent of location thanks to an aggregate or even an inverter.
HVO is a 100% renewable heating oil with up to 90% lower emissions than fossil fuel.
Powerful in the cold - even at -28°C
- A nominal output of 90 kW is maintained at -15°C using only the heat pump compressors.
- Maximum output of 190 kW down to -15°C, and 172 kW at temperatures below -15°C.
- A heating output of 100 kW at temperatures below -28°C is ensured by the integrated support system.
- The container-integrated condensing oil boiler ensures performance even in the harshest frosts, with near-zero emissions (90% lower than fossil fuels) and excellent efficiency (annual efficiency of 95–97%).
A scalable and efficient solution
- Multiple units can be connected together, increasing the output in 90 kW / 190 kW increments.
- Other power versions are also available in a single container, depending on project requirements: 90 – 120 – 150 – 180 kW.
- Consistent performance year-round – cooling and dehumidification in summer, heating in winter.
AirTreater / Proseassa
Prosea has a containerised process cooling package (VJK) equipped with a free cooling function. It allows a full 70 kW cooling capacity without compressors in cold conditions (below -5 °C). This makes it a highly energy-efficient and reliable solution, especially for critical process cooling applications.
Intelligent cooling - maximum efficiency
- Cooling capacity: 70 kW
- The free cooling function activates automatically, and below –5 °C, cooling operates without compressors, delivering 70 kW of cooling capacity with exceptional cost efficiency.
- Dual system for critical components – high operational reliability.
- A tailored solution for high-specification applications.
a Tested solution
The first unit was delivered to Suomen Biovoima Oy in 3/2025, where it is part of the company’s methane drying solution. Proseassa is designed for heavy-duty use – for applications where system reliability and energy efficiency are of paramount importance.
Proseassa provides an extremely efficient, quiet and economical cooling solution for industrial, power generation or technical premises, for example – especially in environments where cooling interruptions are unacceptable.
Read More
Ouman remote management - complete remote control for AirTreater products
AirTreater services utilize Ouman’s remote management system, which enables efficient and effortless remote control of condition management. Ouman remote management provides our customers with a real-time view of equipment operation and the ability to adjust and optimise system settings directly from a web browser – anytime, anywhere. Through our service centre, we can provide 24/7/365 help-desk services to our customers.
With remote management we can:
- Monitor system performance and environmental conditions in real time.
- Adjust settings such as power output and heating.
- Optimize device operation.
- Respond quickly to alerts and potential operational anomalies.
Ouman remote management is an integral part of the service and maintenance provided by AirTreater. It ensures that your ventilation system is always working at its best – energy-efficiently, reliably and with user comfort at the forefront. The system supports the ModBus bus protocol, which enables integration into a larger system.
Download our brochure
You will receive a brochure by email after submitting the form.
Frequently asked questions
What does heat pump sizing mean?
All heating and cooling equipment should be selected according to the site and the site requirements, the right equipment in the right place and everyone is happy. The same is especially true the other way round. Factors to consider include the power output of the unit at different outdoor temperatures and the temperature of the outgoing water. AirTreater/Cáhci offers exceptionally high outlet water temperatures with compressors alone, +75°C at outdoor temperatures of -15°C and 55°C at outdoor temperatures of 25°C.
In practice, this means that a 50kW rated boiler, for example, will only deliver 21kW of compressor power at -20°C outdoor temperature. This logic applies to most good basic equipment. There are technical solutions to keep the power higher, but usually at the cost of a drop in efficiency over the whole temperature range.
Air to air heat pump sizing should be done carefully and professionally. The output of heat pumps is given in accordance with the standard at an outdoor temperature of + 7 °C. As the air gets colder, its energy content decreases, as does the energy available from it, the power.
In practice, this means that a 50kW rated boiler, for example, will only put out 21kW of compressor power at -20°C outside. This logic applies to most good basic equipment. There are technical solutions to keep the power higher, but usually at the cost of a drop in efficiency over the whole temperature range.
Well-known, high-quality manufacturers are very transparent about the performance of their products. Similarly, high quality products are Eurovent certified, which guarantees that the declared performance values are correct. If this information is not available, it should be taken seriously when making decisions.
Why is it important to pay attention to the actual heating capacity?
For example, if the power requirement is 100 kW, two 50 kW heat pumps drawing energy from the air will give a combined maximum output of about 42 kW. Either the difference must be made up by a back-up system, oil or electricity, or alternatively the whole system can be implemented with three pumps (3*21 kW = 63 kW) or four (84 kW).
The investment becomes more expensive, the efficiency improves and the lifetime of the equipment increases.
Either way, it is worth making sure that the prospective supplier understands what he is doing and that the required heating capacity is achieved under all circumstances.
What does a backup system mean?
A heat pump that draws energy from the air must never be the sole and only source of heat, but requires a full backup system. There are products on the market with very creative designations. For example, there may be a product that is advertised as a 100 kW VILP solution, but there is, say, only a 40 kW electric boiler.
When it’s -35°C below zero the heat pumps run out of power and if the boiler doesn’t produce more than 40 kW we all have a problem on our hands. So the power promised for the product must be available in all weathers. Those days are few and far between, but they must be taken into account. Here AirTreater products are absolutely uncompromising: the rated power is always reached, the maximum power is significantly higher with AirTreater products.
Choosing a backup system
In practice, the backup system can be either electricity or oil. Oil is a bit out of fashion these days, but it has many excellent benefits. Electricity is easy and cheap to set up and, as we rarely have extreme temperatures, if the system is otherwise well sized, running costs are not a big issue. The downside of electricity, however, is the fuse size it requires. If there is, say, one week in the year when you have to run all your power on a backup system, then your monthly payments will be 12 months/year.
A 100 kW electric boiler needs 3*200 amp. fuses, and there are few places where these are available, in addition to other uses. A modern oil boiler, on the other hand, has excellent efficiency, and we recommend the use of condensing oil boilers. They last a long time in such irregular use and have an annual efficiency of 95-07%, using HVO or similar renewable oil we are almost emission free, emissions are reduced to 90% of the original emission level. Electricity demand is minimal compared to an electric boiler, if necessary the condensing oil boiler and the whole system can be run on an aggregate or inverter and batteries in emergency mode.
How does remote monitoring work in AirTreater products?
Remote control means controlling the device from a location other than the control panel of the device itself. Remote monitoring also allows any alarms to be sent to the desired addresses/numbers. Biegga has advanced Ouman control which provides 24/7/365 access to Biegga from anywhere with a GSM/trunked connection. Analysing possible faults or making adjustments on behalf of the customer is then really fast and cost-effective from anywhere.
We also offer the possibility of 24/7/365 remote monitoring where alarms are routed to a service centre that can take the necessary action to ensure the problem is resolved as quickly as possible.
What types of applications are AirTreater products suitable for?
AirTreater products are quite versatile. The size of the room and further energy consumption must either be determined from past consumption or estimated by calculation. The size of a farm for even the smallest Biega is between 500 and 1000 m2 , depending on the energy efficiency of the farm. The Biegga is suitable for spacious spaces where air distribution through ducts is easy to implement. The Čáhci is suitable for more mazelike spaces and for spaces where liquid-cycle energy distribution is desirable. The Čáhci can also cope with very low electricity consumption if an integrated condensing oil boiler is used, if necessary with a very low fuse size/aggregate.
How long does it take to install a Biegga system, for example?
AirTreater products are pre-packed in shipping containers and the on-site deployment is very smooth. The connection of the container itself can be done in one working day, the whole process depends, for example, on the construction of the necessary heat distribution system.
If no heat distribution is required, the AirTreater can be up and running in one or two working days.
How does a heat pump work?
The heat pump exploits the dependence of refrigerant and pressure. As the pressure rises, the temperature rises and as the pressure falls, the temperature falls. This allows energy to be extracted from the outside air even if the temperature is only -25°C.
AirTreater takes environmental control to a new level
Contact us today to book a survey or to find out more about our services.